.png)
EC Instruments & Engineering Sdn Bhd
46, Jalan Seri Austin 3/55,
Taman Seri Austin,
81100 Johor Bahru,
Johor, Malaysia.
46, Jalan Seri Austin 3/55,
Taman Seri Austin,
81100 Johor Bahru,
Johor, Malaysia.
+607-2870393
EC Instruments & Engineering
Pte Ltd
Pte Ltd
6, Penjuru Place,
#01-31,2-8 Penjuru Tech Hub,
Singapore 608781.
#01-31,2-8 Penjuru Tech Hub,
Singapore 608781.
+65-96312280
Ipoh Office
29, Laluan Bg Perdana 20, Taman Batu Gajah Perdana, 31550 Pusing, Perak, Malaysia.
SPEEDTRONIC N
| Previous | 6 / 6 | Next |
- COMITRONIC-BTI MALAYSIA SINGAPORE
- COMITRONIC SAFETY RELAY MALAYSIA SINGAPORE
- COMITRONIC SAFETY MODULES MALAYSIA SINGAPORE
- SPEEDTRONIC SAFETY RELAY MALAYSIA SINGAPORE
- SPEEDTRONIC N - Controls the zero speed of motors with unlock control
SPEEDTRONIC N - CONTROLS THE ZERO SPEED OF MOTORS WITH UNLOCK CONTROL
Zero speed control with lock release
Door unlocking control on motor shutdown
Detection of asynchronous motors stoppage without external sensor
Removable terminals
Performance level with AWAX controller: PL = e
Safety category: 4
Zero speed control with lock release
Door unlocking control on motor shutdown
Detection of asynchronous motors stoppage without external sensor
Removable terminals
Performance level with AWAX controller: PL = e
Safety category: 4
- Time before dangerous failure: MTTFd = 100 years
- Cycle before dangerous failure: B10d=100,000 at 5A
- Risk duration: approx. 2 to 7s adjustable at front
- Persistence: approx. 20 mV to 700 mV adjustable front
- Motor power: up to 3x690 VAC
- Protection for severed wires: yes
- Protection against disconnection of motor coiling: yes
- Safety contacts: 3x NO 8A/250V redundant
- Diagnostics: 1x NF 8A/250V redundant parallel.
- 1 PNP ''OK'' output indicating motor coiling presence.
- 1 PNP ''ERROR'' output indicating a synchronization malfunction.
- 1 ''RS'' system reset input.
- Indicators: 3 LEDs for diagnostics
- Reset: automatic
- Mounting: symmetrical DIN 35mm rail on DIN 50022
- Mounting: IP 20 electrical box
- Electrical connection: Maximum 14 AWG (2.08 mm²) / 250V minimum
- Temperature: -20°C to +60°C