1
Share:
Multiturn Absolute Kit Encoder with BiSS C Preset Interface
The POSITAL IXARC CCD-BC00B-1618-TE3S-JRA Multiturn Kit Encoder combines capacitive and magnetic sensing technology with an 18-bit singleturn resolution, 16-bit multiturn resolution and BiSS C interface for rotary position measurement.
Part of the POSITAL IXARC range, this modular absolute kit encoder features a hollow-shaft design for integration into compatible rotary systems. It provides a BiSS C interface with preset functionality, RS422 signalling and diagnostic functions for checking the stator-rotor air gap and start-up procedure. Its modular construction allows equipment designers and system integrators to evaluate the encoder according to mechanical installation, electrical connection and rotary position measurement requirements.
Multiturn Position Measurement and Sensor Technology
The CCD-BC00B-1618-TE3S-JRA uses capacitive and magnetic sensing technology to provide absolute rotary position information. The encoder is specified with 18-bit singleturn and 16-bit multiturn resolution, together with an integral non-linearity (INL) accuracy of ±0.02°.
Its hollow-shaft arrangement and specified stator-rotor air gap support mechanical integration planning. The original product information also identifies permissible axial and radial misalignment values that should be considered during installation.
BiSS C Communication and Diagnostic Functions
The encoder supports a BiSS C interface with preset functionality and an interface cycle time of at least 18 microseconds. Programming functions are available through register communication, including Wiegand sensor testing, preset value configuration and multiturn reinitialisation.
Diagnostic functions include stator-rotor air gap and start-up procedure checking. The encoder also incorporates an RS422 output driver, RS422 clock input and a specified clock frequency range from 80 kHz to 10 MHz.
Technical Specifications
| Specification | Details |
|---|---|
| Interface | |
| Interface | BiSS C with Preset |
| Interface Cycle Time | ≥ 18 µs |
| Diagnostics | Stator-Rotor Air Gap and Start-up Procedure Check |
| Programming Functions | Register communication for Wiegand sensor test, preset value and multiturn reinitialisation |
| Cycle of Parameter Saving | 10,000 |
| Interface Remark | Binary |
| Outputs | |
| Output Driver | RS422 |
| Connector | JST SM10B-GHS-TB (JST) |
| Electrical Data | |
| Supply Voltage | 4.5-26.4 VDC |
| Current Consumption | Typically 200 mA at 5 V (no load) |
| Start-Up Time | < 1 second |
| Clock Input | RS422 |
| Clock Frequency | 80 kHz to 10 MHz |
| Reverse Polarity Protection | Yes |
| Short Circuit Protection | Yes |
| Maximum Permissible Electric Speed | 6,000 min-1 |
| MTTF | 105 years at 60°C, as stated in the original specifications |
| EMC: Emitted Interference | The encoder is a sub-assembly rather than an independent system. CE compliance for the complete installation must be ensured by the system integrator. |
| EMC: Noise Immunity | The encoder is a sub-assembly rather than an independent system. CE compliance for the complete installation must be ensured by the system integrator. |
| Sensor | |
| Sensor Technology | Capacitive + Magnetic |
| Singleturn Resolution | 18 bit |
| Multiturn Resolution | 16 bit |
| Accuracy (INL) | ±0.02° |
| Code | Binary |
| Environmental Specifications | |
| Protection Class (Housing) | IP20 |
| Minimum Temperature | -40°C (-40°F) |
| Maximum Temperature | +105°C (221°F) |
| Mechanical Data | |
| Top Shield | Screwed |
| Housing Material | Plastic / Steel |
| Housing Coating | Zinc Plated |
| Shaft Type | Hollow |
| Shaft Material | Steel |
| Shaft Fastening Options | Shaft Set Screw |
| Maximum Axial / Radial Misalignment | ±0.1 mm / ±0.2 mm |
| Stator-Rotor Air Gap | 0.7 mm |
| Weight | 30 g (0.07 lb) |
| Rotor Inertia | ≤ 1,000 gcm² [≤ 5.5 oz-in²] |
| Shock Resistance | ≤ 200 g (half sine 11 ms, EN 60068-2-27) |
| Permanent Shock Resistance | ≤ 20 g (half sine 11 ms); ≤ 5 g (half sine 30 ms) |
| Vibration Resistance | ≤ 20 g (20 Hz to 2,000 Hz, EN 60068-2-6) |
What You Get
- Absolute Multiturn Measurement: 18-bit singleturn and 16-bit multiturn resolution.
- Capacitive and Magnetic Sensing: Combined sensing technology for rotary position measurement.
- BiSS C Interface: Interface with preset functionality and RS422 signalling.
- Diagnostic Features: Stator-rotor air gap and start-up procedure checking.
- Programmable Functions: Wiegand sensor test, preset configuration and multiturn reinitialisation.
- Hollow-Shaft Design: Modular kit encoder construction for compatible mechanical installations.
- Electrical Protection: Reverse polarity and short circuit protection.
- Environmental Specifications: IP20 housing and specified temperature range from -40°C to +105°C.
Encoder Selection and Integration Requirements
When selecting an absolute rotary encoder, consider the required position resolution, communication interface, shaft arrangement, electrical supply and mechanical installation tolerances. The CCD-BC00B-1618-TE3S-JRA offers a hollow-shaft modular configuration with BiSS C communication and defined electrical and environmental specifications.
As this kit encoder is supplied as a sub-assembly, responsibility for CE compliance of the complete system remains with the equipment or system integrator, as stated in the original product information.
Discuss your rotary position measurement, encoder interface and mechanical integration requirements to determine whether this IXARC model is suitable for your application.
Contact us today to enquire about the POSITAL IXARC CCD-BC00B-1618-TE3S-JRA Multiturn Kit Encoder, request technical information or obtain a quotation.
Inquiry - POSITAL IXARC CCD-BC00B-1618-TE3S-JRA Multiturn Kit Encoder
