1
Share:
DX 6x1 is a series of digital photo-radiometric probes for the PRO D01 / PRO D05 handheld meters.
The probes are supplied factory-calibrated, and they are ready to use. The probes can be optionally supplied with a DAkkS/ACCREDIA calibration certificate.
The calibration data are stored in the probe, allowing for interchangeability without the need for recalibration.
Integrated bubble level to facilitate horizontal positioning during installation.
Equipped with 4-pin M12 connector.
The probes measure Illuminance Luminance Irradiance and Photosynthetically Active Radiation
- Illuminance
- Luminance
- Irradiance (specific probes for UVA, UVB, UVC, UVBC and Blue light ranges available)
- PAR (Photosynthetically Active Radiation)
The probes are supplied factory-calibrated, and they are ready to use. The probes can be optionally supplied with a DAkkS/ACCREDIA calibration certificate.
The calibration data are stored in the probe, allowing for interchangeability without the need for recalibration.
Integrated bubble level to facilitate horizontal positioning during installation.
Equipped with 4-pin M12 connector.
- Output:
- UART (TTL 3.3V)
- Power supply:
- 3.3…6 Vdc
- Power consumption:
- < 1 mA typ.
- Connection:
- Fixed cable ending with M12 connector (1, 2 or 5m)
- Operating temperature:
- 0…+50 °C
- Dimensions:
- Ø50 x 42 mm
- Weight:
- 200 g approx.
- Material:
- Anodized aluminium
Inquiry - DX6 - Digital light sensor (e.g. for PRO Dxx)
