E-KC-200-H Series Head-Mounted Temperature Converter With Hart Protocol

E-KC-200-H is a head-mounted type two-wire temperature transducer conforming to the HART protocol. Converters converts the measured value to a 4-20mA current signal according to the configured scale. Thermocouple and resistance thermometer type temperature sensors can be connected to the input of the converter.
 
DC mV and resistor can also be connected to the converter input.
 
E-KC-200-H converter can be configured with the HART configurator or a special PC software available from Elimko.
 
Installation, repair and maintenance service of E-KC-200-H should be done by trained technical personnel. The technical staff who will do this should read and understand the manual of the converter carefully and intervene.
 
If the information given in the user manual is not sufficient, your company should contact Elimko. Making modifications for the converter or rendering repair-maintenance services in case of malfunction can only be allowed as permitted in user manual.
 
Company using the product, may perform installation in conformity with the national regulations and realize repair-maintenance.