EC Instruments & Engineering Sdn Bhd
46, Jalan Seri Austin 3/55,
Taman Seri Austin,
81100 Johor Bahru,
Johor, Malaysia.
46, Jalan Seri Austin 3/55,
Taman Seri Austin,
81100 Johor Bahru,
Johor, Malaysia.
+607-2870393
EC Instruments & Engineering
Pte Ltd
Pte Ltd
6, Penjuru Place,
#01-31,2-8 Penjuru Tech Hub,
Singapore 608781.
#01-31,2-8 Penjuru Tech Hub,
Singapore 608781.
+65-96312280
Ipoh Office
29, Laluan Bg Perdana 20, Taman Batu Gajah Perdana, 31550 Pusing, Perak, Malaysia.
BOSTER
Previous | 1 / 2 | Next |
- COMITRONIC-BTI MALAYSIA SINGAPORE
- COMITRONIC SAFETY SWITCH MALAYSIA SINGAPORE
- COMITRONIC Safety Switch magnetic holding
- SAFETY SWITCH MAGNETIC HOLDING MALAYSIA SINGAPORE
- COMITRONIC BOSTERSAFETY SWITCH MALAYSIA SINGAPORE
BOSTER - SAFETY SWITCH WITH MAGNETIC HOLD 4 KGS
Position control for doors / casings on dangerous machinery with magnetic holding devices
40N integrated stainless steel magnetic door holding
Contactless encoded electronic sensor with relay
Category 3 total safety management without an external controller
Level of performance without an external controller: PL = d
Level of performance with AWAX controller: up to PL = e
Safety category without an external controller: 3
Position control for doors / casings on dangerous machinery with magnetic holding devices
40N integrated stainless steel magnetic door holding
Contactless encoded electronic sensor with relay
Category 3 total safety management without an external controller
Level of performance without an external controller: PL = d
Level of performance with AWAX controller: up to PL = e
Safety category without an external controller: 3
- Safety Integrity Level: SIL 2
- Cycle before dangerous failure: B10d = 2,000,000 at 2A
- Max. activation distance: 4 mm, 2 mm hysteresis
- Holding Force: transmitter + receiver in contact = 40N
- Safety contacts/diagnostics: 2 x NO 2A/48V redundant / 1 x PNP 250mA encoding detection: single inviolable code
- Reset: automatic
- Attachment: 4 tamper-proof M4 screws (optional ref: BH4)
- Mounting position: 1
- Material: INOX 316L mirror polished
- Electrical connection: 3, 6, 12m cable
- Water resistance: IP 67
- Temperature: -25°C to +60°C
- Marking: INOX316L laser engraving with mechanical punching of the serial number for permanent traceability
- Certification: TÜV Rheinland 01/205/5238/12
- License Test Mark 968/EL 214.01/12