EC Instruments & Engineering Sdn Bhd
46, Jalan Seri Austin 3/55,
Taman Seri Austin,
81100 Johor Bahru,
Johor, Malaysia.
46, Jalan Seri Austin 3/55,
Taman Seri Austin,
81100 Johor Bahru,
Johor, Malaysia.
+607-2870393
EC Instruments & Engineering
Pte Ltd
Pte Ltd
6, Penjuru Place,
#01-31,2-8 Penjuru Tech Hub,
Singapore 608781.
#01-31,2-8 Penjuru Tech Hub,
Singapore 608781.
+65-96312280
Ipoh Office
29, Laluan Bg Perdana 20, Taman Batu Gajah Perdana, 31550 Pusing, Perak, Malaysia.
ESM-3712-CN
Previous | 2 / 2 | Next |
- EMKO MALAYSIA SINGAPORE
- EMKO MALAYSIA DISTRIBUTORS
- EMKO SINGAPORE DISTRIBUTORS
- EMKO COOLING CONTROLLER MALAYSIA SINGAPORE
- EMKO ESM3712-CN COOLING CONTROLLER MALAYSIA SINGAPORE
Digital ON/OFF + DEFROST Cooling Controller
3 Output for compressor, defrost and fan controls
Separately adjustable 2 offset value for cabinet and evaporator sensor
Operation selection of compressor operate continously,
stops or operates periodically in case of cabinet probe defect
Fan can be operated depending on evaporator temperature or
(cabinet-evaporator) temperature
Cooling Application
NTC Input or PTC Input (Must be determined in order.)
ON/OFF Control
Adjustable °C and°F
Set value boundaries
Selectable defrost function (hot gas or electric)
Adjustable defrost time from front panel
Installing parameters using Prokey (Optional)
Remote access, data collecting and controlling with ModBus RTU (Optional)
3 Output for compressor, defrost and fan controls
Separately adjustable 2 offset value for cabinet and evaporator sensor
Operation selection of compressor operate continously,
stops or operates periodically in case of cabinet probe defect
Fan can be operated depending on evaporator temperature or
(cabinet-evaporator) temperature
Cooling Application
NTC Input or PTC Input (Must be determined in order.)
ON/OFF Control
Adjustable °C and°F
Set value boundaries
Selectable defrost function (hot gas or electric)
Adjustable defrost time from front panel
Installing parameters using Prokey (Optional)
Remote access, data collecting and controlling with ModBus RTU (Optional)