EC Instruments & Engineering Sdn Bhd
46, Jalan Seri Austin 3/55,
Taman Seri Austin,
81100 Johor Bahru,
Johor, Malaysia.
46, Jalan Seri Austin 3/55,
Taman Seri Austin,
81100 Johor Bahru,
Johor, Malaysia.
+607-2870393
EC Instruments & Engineering
Pte Ltd
Pte Ltd
6, Penjuru Place,
#01-31,2-8 Penjuru Tech Hub,
Singapore 608781.
#01-31,2-8 Penjuru Tech Hub,
Singapore 608781.
+65-96312280
Ipoh Office
29, Laluan Bg Perdana 20, Taman Batu Gajah Perdana, 31550 Pusing, Perak, Malaysia.
Humidity sensor for condensation control
Previous | 3 / 3 | Next |
with capacitive Mela® humidity sensor element
for condensation control
with analogue output signal type FGO2.K/5
with switching output type FGS
Dew-point control sensors are mounted on cooling water pipes or on cooled surfaces and are used to monitor if the temperature drops below the dew-point.
They measure the relative humidity directly on the surface of the cooled part of the equipment and can, therefore, be used
- to influence cooling power
- to switch cooling systems on or off
- to signal the point at which the temperature drops below the dew-point.
This means that cooling ceilings, for example, can be operated with perfect results, even at critical climatic values, without condensation starting to form.
for condensation control
with analogue output signal type FGO2.K/5
with switching output type FGS
Dew-point control sensors are mounted on cooling water pipes or on cooled surfaces and are used to monitor if the temperature drops below the dew-point.
They measure the relative humidity directly on the surface of the cooled part of the equipment and can, therefore, be used
- to influence cooling power
- to switch cooling systems on or off
- to signal the point at which the temperature drops below the dew-point.
This means that cooling ceilings, for example, can be operated with perfect results, even at critical climatic values, without condensation starting to form.